RTV-2 Silicone Rubber FAQs & Solutions

Effective Techniques for Minimizing Air Bubbles in Liquid Silicone

Reducing bubbles in liquid silicone without a vacuum pump can be challenging, but with some techniques, you can achieve relatively good results. Here are some tips that can assist you in minimizing air bubbles to the greatest extent possible.

Feb 02, 2025
957

Silicone Mold Shrinkage Reduction: Proven Techniques

Reducing the shrinkage rate of silicone molds has long been a challenge for many mold manufacturers, as it can result in inconsistent product dimensions.

Feb 10, 2025
606

Explore the Differences Between RTV and RTV-2 Silicone

RTV is a common term in the silicone industry, and it stands for Room Temperature Vulcanization. This type of liquid silicone material can cure or solidify at room temperature without the need for heating or pressurization.

Feb 09, 2025
591

The Effects of Adding Diluents on Silicone Performance

When using RTV-2 silicone material for mold making, some clients may consider adding silicone oil to dilute the liquid silicone, making it easier to flow and penetrate into small intricate areas.

Feb 05, 2025
547

Understanding the Risk of Skin Allergic Reactions from Liquid Silicone

When using RTV-2 liquid silicone materials to create molds, accidental skin contact with the liquid silicone is inevitable. But does this exposure potentially cause harm or trigger skin allergies?

Feb 05, 2025
530

Guide to Proper Cutting of Silicone Molds

When creating silicone molds, demolding complex models can be a challenging task. In such cases, it becomes necessary to cut the silicone mold to facilitate the removal of the model.

Feb 08, 2025
460

How to Choose the Appropriate Shore Durometer for Measuring Hardness

The Shore hardness scale is a device used to measure the hardness of materials. Hardness is a measure of a material's resistance to indentation, and this type of measurement is crucial for understanding material properties.

Feb 03, 2025
419

Comprehensive Guide for Selecting RTV-2 Silicone Materials

When it comes to the fabrication of molds, RTV-2 silicone is often the preferred material. However, there are numerous types of silicone rubbers available.

Feb 04, 2025
410

Guide to Adjusting the Ratio of Tin-Cure Silicone and Curing Agent

Tin-cured silicone rubber is a commonly used RTV-2 silicone material in industrial silicone mold making. It is typically composed of a Part A base and Part B curing agent.

Feb 08, 2025
375

Comparing Vacuum Chambers and Pressure Pots

A vacuum chamber and a pressure pot are commonly used equipment in mold-making and casting processes. They both serve the purpose of removing air bubbles from the project, ensuring a smooth and bubble-free surface on the final product.

Feb 09, 2025
294